Address io14rfld5w759e6ychhmkm559wptpvvkqgntr60mu

// File: @openzeppelin/contracts/security/ReentrancyGuard.sol



pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// File: @openzeppelin/contracts/utils/Context.sol



pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol



pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: libs/IMerdReferral.sol


pragma solidity >=0.4.22 <0.9.0;
interface IMerdReferral {
    /**
     * @dev Record referral.
     */
    function recordReferral(address user, address referrer) external;

    /**
     * @dev Record referral commission.
     */
    function recordReferralCommission(address referrer, uint256 commission) external;

    /**
     * @dev Get the referrer address that referred the user.
     */
    function getReferrer(address user) external view returns (address);
}

// File: @openzeppelin/contracts/utils/Address.sol



pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: libs/IBEP20.sol



pragma solidity >=0.4.22 <0.9.0;


interface IBEP20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the token decimals.
     */
    function decimals() external view returns (uint8);

    /**
     * @dev Returns the token symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the token name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external view returns (address);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address _owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/utils/math/SafeMath.sol



pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// File: libs/BEP20.sol



pragma solidity >=0.4.22 <0.9.0;






/**
 * @dev Implementation of the {IBEP20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {BEP20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-BEP20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of BEP20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IBEP20-approve}.
 */
contract BEP20 is Context, IBEP20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external override view returns (address) {
        return owner();
    }

    /**
     * @dev Returns the token name.
     */
    function name() public override view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token decimals.
     */
    function decimals() public override view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev Returns the token symbol.
     */
    function symbol() public override view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {BEP20-totalSupply}.
     */
    function totalSupply() public override view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {BEP20-balanceOf}.
     */
    function balanceOf(address account) public override view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {BEP20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {BEP20-allowance}.
     */
    function allowance(address owner, address spender) public override view returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {BEP20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {BEP20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {BEP20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(amount, "BEP20: transfer amount exceeds allowance")
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {BEP20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {BEP20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(subtractedValue, "BEP20: decreased allowance below zero")
        );
        return true;
    }

    /**
     * @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
     * the total supply.
     *
     * Requirements
     *
     * - `msg.sender` must be the token owner
     */
    function mint(uint256 amount) public onlyOwner returns (bool) {
        _mint(_msgSender(), amount);
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "BEP20: transfer from the zero address");
        require(recipient != address(0), "BEP20: transfer to the zero address");

        _balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "BEP20: mint to the zero address");

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal {
        require(account != address(0), "BEP20: burn from the zero address");

        _balances[account] = _balances[account].sub(amount, "BEP20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal {
        require(owner != address(0), "BEP20: approve from the zero address");
        require(spender != address(0), "BEP20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`.`amount` is then deducted
     * from the caller's allowance.
     *
     * See {_burn} and {_approve}.
     */
    function _burnFrom(address account, uint256 amount) internal {
        _burn(account, amount);
        _approve(
            account,
            _msgSender(),
            _allowances[account][_msgSender()].sub(amount, "BEP20: burn amount exceeds allowance")
        );
    }
}

// File: Mermaid.sol



pragma solidity >=0.8.0;



contract Mermaid is BEP20 {
    using SafeMath for uint256;
    using SafeMath for uint16;
    using SafeMath for uint256;

    // The operator can only update the transfer tax rate
    address private _operator;

    // burn wallet
    address public burnWallet = 0x2D110aba362AA34e3595244Dd03fDF2Db455b31d;
    
    // initial mint wallet
    address public initialMintWallet = 0x1780688d4f3fbE13206Cf6349EFA1873e90f5ae0;
     
     // max mint amount
    uint256 public constant MAX_SUPPLY = 90000 ether;

    // Events
    event OperatorTransferred(
        address indexed previousOperator,
        address indexed newOperator
    );
    event TransferTaxRateUpdated(
        address indexed operator,
        uint256 previousRate,
        uint256 newRate
    );



    modifier onlyOperator() {
        require(
            _operator == msg.sender,
            "operator: caller is not the operator"
        );
        _;
    }

    /**
     * @notice Constructs the MerdToken contract.
     */
    constructor() public BEP20("Mermaid", "MERD") {
        mint(initialMintWallet, 10600 ether);
        mint(burnWallet, 400 ether);
        _operator = _msgSender();
        emit OperatorTransferred(address(0), _operator);

    }

    /// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
    function mint(address _to, uint256 _amount) public onlyOwner {
        require(
            totalSupply() + (_amount) <= MAX_SUPPLY,
            "total supply exceeds max supply"
        );

        _mint(_to, _amount);
        _moveDelegates(address(0), _delegates[_to], _amount);
    }

    /**
     * @dev Destroys `amount` tokens from burnWallet, reducing the
     * total supply.
     */
    function burn(uint256 _amount) public {
        require(msg.sender==burnWallet, "Not authorized to burn tokens");
        _burn(msg.sender, _amount);
    }

    /// @dev overrides transfer function to meet tokenomics of MERD
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    )
        internal
        virtual
        override
    {
        require(sender != address(0), "BEP20: transfer from the zero address");
        require(recipient != address(0), "BEP20: transfer to the zero address");
        require(amount > 0, "Insufficient transfer amount");
        super._transfer(sender, recipient, amount);
    }

    /**
     * @dev Returns the address of the current operator.
     */
    function operator() public view returns (address) {
        return _operator;
    }

    /**
     * @dev Transfers operator of the contract to a new account (`newOperator`).
     * Can only be called by the current operator.
     */
    function transferOperator(address newOperator) public onlyOperator {
        require(
            newOperator != address(0),
            "MERD::transferOperator: new operator is the zero address"
        );
        emit OperatorTransferred(_operator, newOperator);
        _operator = newOperator;
    }

    /// @dev A record of each accounts delegate
    mapping(address => address) internal _delegates;

    /// @notice A checkpoint for marking number of votes from a given block
    struct Checkpoint {
        uint32 fromBlock;
        uint256 votes;
    }

    /// @notice A record of votes checkpoints for each account, by index
    mapping(address => mapping(uint32 => Checkpoint)) public checkpoints;

    /// @notice The number of checkpoints for each account
    mapping(address => uint32) public numCheckpoints;

    /// @notice The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH =
        keccak256(
            "EIP712Domain(string name,uint256 chainId,address verifyingContract)"
        );

    /// @notice The EIP-712 typehash for the delegation struct used by the contract
    bytes32 public constant DELEGATION_TYPEHASH =
        keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    /// @notice A record of states for signing / validating signatures
    mapping(address => uint256) public nonces;

    /// @notice An event thats emitted when an account changes its delegate
    event DelegateChanged(
        address indexed delegator,
        address indexed fromDelegate,
        address indexed toDelegate
    );

    /// @notice An event thats emitted when a delegate account's vote balance changes
    event DelegateVotesChanged(
        address indexed delegate,
        uint256 previousBalance,
        uint256 newBalance
    );

    /**
     * @notice Delegate votes from `msg.sender` to `delegatee`
     * @param delegator The address to get delegatee for
     */
    function delegates(address delegator) external view returns (address) {
        return _delegates[delegator];
    }

    /**
     * @notice Delegate votes from `msg.sender` to `delegatee`
     * @param delegatee The address to delegate votes to
     */
    function delegate(address delegatee) external {
        return _delegate(msg.sender, delegatee);
    }

    /**
     * @notice Delegates votes from signatory to `delegatee`
     * @param delegatee The address to delegate votes to
     * @param nonce The contract state required to match the signature
     * @param expiry The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function delegateBySig(
        address delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external {
        bytes32 domainSeparator = keccak256(
            abi.encode(
                DOMAIN_TYPEHASH,
                keccak256(bytes(name())),
                getChainId(),
                address(this)
            )
        );

        bytes32 structHash = keccak256(
            abi.encode(DELEGATION_TYPEHASH, delegatee, nonce, expiry)
        );

        bytes32 digest = keccak256(
            abi.encodePacked("\x19\x01", domainSeparator, structHash)
        );

        address signatory = ecrecover(digest, v, r, s);
        require(
            nonce == nonces[signatory]++,
            "MERD::delegateBySig: invalid nonce"
        );
        require(
            block.timestamp <= expiry,
            "MERD::delegateBySig: signature expired"
        );
        return _delegate(signatory, delegatee);
    }

    /**
     * @notice Gets the current votes balance for `account`
     * @param account The address to get votes balance
     * @return The number of current votes for `account`
     */
    function getCurrentVotes(address account) external view returns (uint256) {
        uint32 nCheckpoints = numCheckpoints[account];
        return
            nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
    }

    /**
     * @notice Determine the prior number of votes for an account as of a block number
     * @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
     * @param account The address of the account to check
     * @param blockNumber The block number to get the vote balance at
     * @return The number of votes the account had as of the given block
     */
    function getPriorVotes(address account, uint256 blockNumber)
        external
        view
        returns (uint256)
    {
        require(
            blockNumber < block.number,
            "MERD::getPriorVotes: not yet determined"
        );

        uint32 nCheckpoints = numCheckpoints[account];
        if (nCheckpoints == 0) {
            return 0;
        }

        // First check most recent balance
        if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
            return checkpoints[account][nCheckpoints - 1].votes;
        }

        // Next check implicit zero balance
        if (checkpoints[account][0].fromBlock > blockNumber) {
            return 0;
        }

        uint32 lower = 0;
        uint32 upper = nCheckpoints - 1;
        while (upper > lower) {
            uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
            Checkpoint memory cp = checkpoints[account][center];
            if (cp.fromBlock == blockNumber) {
                return cp.votes;
            } else if (cp.fromBlock < blockNumber) {
                lower = center;
            } else {
                upper = center - 1;
            }
        }
        return checkpoints[account][lower].votes;
    }

    function _delegate(address delegator, address delegatee) internal {
        address currentDelegate = _delegates[delegator];
        uint256 delegatorBalance = balanceOf(delegator); // balance of underlying MERDs (not scaled);
        _delegates[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveDelegates(currentDelegate, delegatee, delegatorBalance);
    }

    function _moveDelegates(
        address srcRep,
        address dstRep,
        uint256 amount
    ) internal {
        if (srcRep != dstRep && amount > 0) {
            if (srcRep != address(0)) {
                // decrease old representative
                uint32 srcRepNum = numCheckpoints[srcRep];
                uint256 srcRepOld = srcRepNum > 0
                    ? checkpoints[srcRep][srcRepNum - 1].votes
                    : 0;
                uint256 srcRepNew = srcRepOld.sub(amount);
                _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
            }

            if (dstRep != address(0)) {
                // increase new representative
                uint32 dstRepNum = numCheckpoints[dstRep];
                uint256 dstRepOld = dstRepNum > 0
                    ? checkpoints[dstRep][dstRepNum - 1].votes
                    : 0;
                uint256 dstRepNew = dstRepOld.add(amount);
                _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
            }
        }
    }

    function _writeCheckpoint(
        address delegatee,
        uint32 nCheckpoints,
        uint256 oldVotes,
        uint256 newVotes
    ) internal {
        uint32 blockNumber = safe32(
            block.number,
            "MERD::_writeCheckpoint: block number exceeds 32 bits"
        );

        if (
            nCheckpoints > 0 &&
            checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber
        ) {
            checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
        } else {
            checkpoints[delegatee][nCheckpoints] = Checkpoint(
                blockNumber,
                newVotes
            );
            numCheckpoints[delegatee] = nCheckpoints + 1;
        }

        emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
    }

    function safe32(uint256 n, string memory errorMessage)
        internal
        pure
        returns (uint32)
    {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function getChainId() internal view returns (uint256) {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return chainId;
    } 
}

// File: libs/SafeBEP20.sol



pragma solidity >=0.4.22 <0.9.0;




/**
 * @title SafeBEP20
 * @dev Wrappers around BEP20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeBEP20 for IBEP20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeBEP20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IBEP20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IBEP20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IBEP20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IBEP20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeBEP20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IBEP20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IBEP20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(
            value,
            "SafeBEP20: decreased allowance below zero"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IBEP20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeBEP20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeBEP20: BEP20 operation did not succeed");
        }
    }
}

// File: Masterchef.sol



pragma solidity >=0.4.22 <0.9.0;









// MasterChef is the master of Merd. He can make Merd and he is a fair guy.
//
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once MERD is sufficiently
// distributed and the community can show to govern itself.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
contract MasterChef is Ownable, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeBEP20 for IBEP20;

    // Info of each user.
    struct UserInfo {
        uint256 amount; // How many LP tokens the user has provided.
        uint256 rewardDebt; // Reward debt. See explanation below.
        uint256 rewardLockedUp; // Reward locked up.
        //
        // We do some fancy math here. Basically, any point in time, the amount of MERDs
        // entitled to a user but is pending to be distributed is:
        //
        //   pending reward = (user.amount * pool.accMerdPerShare) - user.rewardDebt
        //
        // Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
        //   1. The pool's `accMerdPerShare` (and `lastRewardBlock`) gets updated.
        //   2. User receives the pending reward sent to his/her address.
        //   3. User's `amount` gets updated.
        //   4. User's `rewardDebt` gets updated.
    }

    // Info of each pool.
    struct PoolInfo {
        IBEP20 lpToken; // Address of LP token contract.
        uint256 allocPoint; // How many allocation points assigned to this pool. MERDs to distribute per block.
        uint256 lastRewardBlock; // Last block number that MERDs distribution occurs.
        uint256 accMerdPerShare; // Accumulated MERDs per share, times 1e12. See below.
        uint16 withdrawFeeBP; // Withdraw fee in basis points
    }

    // The MERD TOKEN!
    Mermaid public merd;
    // Dev address.
    address public devAddress = 0xa4eb523d38De6E18198C5ba6C11D4A7EFE615aba;
    // Withdraw Fee address
    address public feeAddress = 0x4083F74df59551EdC368c8Ac0385D9cF20b1076d;
    // burn address
    address public burnAddress = 0x2D110aba362AA34e3595244Dd03fDF2Db455b31d;
    
    // MERD tokens created per block.
    uint256 public merdPerBlock;
    // Initial emission rate: 0.5 MERD per block.
    uint256 public constant INITIAL_EMISSION_RATE = 0.5 ether;
    // Reduce emission every 600 blocks ~ 30 min.
    uint256 public constant EMISSION_REDUCTION_PERIOD_BLOCKS = 600;
    // Emission reduction rate per period in basis points: 5%.
    uint256 public constant EMISSION_REDUCTION_RATE_PER_PERIOD = 500;
    // Last reduction period index
    uint256 public lastReductionPeriodIndex = 0;

    // Info of each pool.
    PoolInfo[] public poolInfo;
    // Info of each user that stakes LP tokens.
    mapping(uint256 => mapping(address => UserInfo)) public userInfo;
    // Total allocation points. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint = 0;
    // The block number when MERD mining starts.
    uint256 public startBlock;
    
    // Merd referral contract address.
    IMerdReferral public merdReferral;
    // Referral commission rate in basis points.
    uint16 public referralCommissionRate = 200;
    // Max referral commission rate: 2%.
    uint16 public constant MAXIMUM_REFERRAL_COMMISSION_RATE = 200;

    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(
        address indexed user,
        uint256 indexed pid,
        uint256 amount
    );
    event EmissionRateUpdated(
        address indexed caller,
        uint256 previousAmount,
        uint256 newAmount
    );
    event ReferralCommissionPaid(
        address indexed user,
        address indexed referrer,
        uint256 commissionAmount
    );
    event RewardLockedUp(
        address indexed user,
        uint256 indexed pid,
        uint256 amountLockedUp
    );

    event addEvent(uint256 _allocPoint,
        IBEP20 _lpToken,
        uint16 _withdrawFeeBP,
        bool _withUpdate);

    event setEvent( uint256 _pid,
        uint256 _allocPoint,
        uint16 _withdrawFeeBP,
        bool _withUpdate);
    event massUpdatePoolEvent();
    event setDevAddressEvent(address _newDevAddress);
    event setFeeAddressEvent(address _feeAddress);
    event setReferralAddressEvent(IMerdReferral _newAddress);
    event setReferralCommissionRateEvent(uint256 _newRate);

    constructor(Mermaid _merd,  IMerdReferral _merdReferral, uint256 _startBlock) public {
        merd = _merd;
        startBlock = _startBlock;
        merdPerBlock = INITIAL_EMISSION_RATE;
        if (block.number > startBlock) {
            uint256 currentIndex = block.number.sub(startBlock).div(
                EMISSION_REDUCTION_PERIOD_BLOCKS
            );
            lastReductionPeriodIndex = currentIndex;
        }
        merdReferral = _merdReferral;
    }

    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    mapping(IBEP20 => bool) public poolExistence;
    modifier nonDuplicated(IBEP20 _lpToken) {
        require(poolExistence[_lpToken] == false, "nonDuplicated: duplicated");
        _;
    }

    // Add a new lp to the pool. Can only be called by the owner.
    // XXX DO NOT add the same LP token more than once. Rewards will be messed up if you do.
    function add(
        uint256 _allocPoint,
        IBEP20 _lpToken,
        uint16 _withdrawFeeBP,
        bool _withUpdate
    ) public onlyOwner nonDuplicated(_lpToken) {
        require(_withdrawFeeBP <= 400, "add: invalid withdraw fee basis points");
        if (_withUpdate) {
            massUpdatePools();
        }
        uint256 lastRewardBlock = block.number > startBlock
            ? block.number
            : startBlock;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolInfo.push(
            PoolInfo({
                lpToken: _lpToken,
                allocPoint: _allocPoint,
                lastRewardBlock: lastRewardBlock,
                accMerdPerShare: 0,
                withdrawFeeBP: _withdrawFeeBP
            })
        );
        poolExistence[_lpToken] = true;
        emit addEvent(_allocPoint,_lpToken,_withdrawFeeBP,_withUpdate);
    }

    // Update the given pool's MERD allocation point and withdraw fee. Can only be called by the owner.
    function set(
        uint256 _pid,
        uint256 _allocPoint,
        uint16 _withdrawFeeBP,
        bool _withUpdate
    ) public onlyOwner {
        require(_withdrawFeeBP <= 400, "set: invalid withdraw fee basis points");
        if (_withUpdate) {
            massUpdatePools();
        }
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(
            _allocPoint
        );
        poolInfo[_pid].allocPoint = _allocPoint;
        poolInfo[_pid].withdrawFeeBP = _withdrawFeeBP;
        emit setEvent(_pid, _allocPoint, _withdrawFeeBP, _withUpdate);
    }

    // Return reward multiplier over the given _from to _to block.
    function getMultiplier(uint256 _from, uint256 _to)
        public
        pure
        returns (uint256)
    {
        return _to.sub(_from);
    }

    // View function to see pending MERDS on frontend.
    function pendingMerd(uint256 _pid, address _user)
        external
        view
        returns (uint256)
    {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accMerdPerShare = pool.accMerdPerShare;
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (block.number > pool.lastRewardBlock && lpSupply != 0) {
            uint256 multiplier = getMultiplier(
                pool.lastRewardBlock,
                block.number
            );
            uint256 merdReward = multiplier
                .mul(merdPerBlock)
                .mul(pool.allocPoint)
                .div(totalAllocPoint);
            accMerdPerShare = accMerdPerShare.add(
                merdReward.mul(1e12).div(lpSupply)
            );
        }
        uint256 pending = user.amount.mul(accMerdPerShare).div(1e12).sub(
            user.rewardDebt
        );
        return pending.add(user.rewardLockedUp);
    }

    // Update reward variables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
        emit massUpdatePoolEvent();
    }

    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.number <= pool.lastRewardBlock) {
            return;
        }
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (lpSupply == 0 || pool.allocPoint == 0) {
            pool.lastRewardBlock = block.number;
            return;
        }
        uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
        uint256 merdReward = multiplier
            .mul(merdPerBlock)
            .mul(pool.allocPoint)
            .div(totalAllocPoint);
            //9% dev and 1% burn address
        
        merd.mint(devAddress, merdReward.mul(9).div(100));
        merd.mint(burnAddress, merdReward.div(100));
        merd.mint(address(this), merdReward);
        pool.accMerdPerShare = pool.accMerdPerShare.add(
            merdReward.mul(1e12).div(lpSupply)
        );
        pool.lastRewardBlock = block.number;
    }

    // Deposit LP tokens to MasterChef for MERD allocation.
    function deposit(
        uint256 _pid,
        uint256 _amount,
        address _referrer
    ) public nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        
        if (
            _amount > 0 &&
            address(merdReferral) != address(0) &&
            _referrer != address(0) &&
            _referrer != msg.sender
        ) {
            merdReferral.recordReferral(msg.sender, _referrer);
        }

       

        if (user.amount > 0) {
            uint256 pending = user
                .amount
                .mul(pool.accMerdPerShare)
                .div(1e12)
                .sub(user.rewardDebt);
            if (pending > 0) {
                uint256 refIncome = pending.mul(referralCommissionRate).div(10000);
                safeMerdTransfer(msg.sender, pending.sub(refIncome));
                payReferralCommission(msg.sender, pending);
            }
        }

        if (_amount > 0) {
            pool.lpToken.safeTransferFrom(
                address(msg.sender),
                address(this),
                _amount
            );
            
        }
        user.amount = user.amount.add(_amount);
        user.rewardDebt = user.amount.mul(pool.accMerdPerShare).div(1e12);
        emit Deposit(msg.sender, _pid, _amount);
        updateEmissionRate();
    }

    // Withdraw LP tokens from MasterChef.
    function withdraw(uint256 _pid, uint256 _amount) public nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        require(user.amount >= _amount, "withdraw: not good");
        updatePool(_pid);
        uint256 pending = user.amount.mul(pool.accMerdPerShare).div(1e12).sub(
            user.rewardDebt
        );
        if (pending > 0) {
            uint256 refIncome = pending.mul(referralCommissionRate).div(10000);
            safeMerdTransfer(msg.sender, pending.sub(refIncome));
            payReferralCommission(msg.sender, pending);
        }
        if (_amount > 0) {

            if (pool.withdrawFeeBP > 0) {
                uint256 withdrawFee = _amount.mul(pool.withdrawFeeBP).div(10000);
                pool.lpToken.safeTransfer(feeAddress, withdrawFee);
                pool.lpToken.safeTransfer(address(msg.sender), _amount.sub(withdrawFee));
            } 
            else{
                pool.lpToken.safeTransfer(address(msg.sender), _amount);
            }
            user.amount = user.amount.sub(_amount);
            
        }
        user.rewardDebt = user.amount.mul(pool.accMerdPerShare).div(1e12);
        emit Withdraw(msg.sender, _pid, _amount);
        updateEmissionRate();
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) public nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        uint256 amount = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;
        pool.lpToken.safeTransfer(address(msg.sender), amount);
        emit EmergencyWithdraw(msg.sender, _pid, amount);
    }

    // Safe merd transfer function, just in case if rounding error causes pool to not have enough MERDs.
    function safeMerdTransfer(address _to, uint256 _amount) internal {
        uint256 merdBal = merd.balanceOf(address(this));
        if (_amount > merdBal) {
            merd.transfer(_to, merdBal);
        } else {
            merd.transfer(_to, _amount);
        }
    }

    // Update dev address by the previous dev.
    function setDevAddress(address _devAddress) public {
        require(msg.sender == devAddress, "setDevAddress: FORBIDDEN");
        require(_devAddress != address(0), "setDevAddress: ZERO");
        devAddress = _devAddress;
        emit setDevAddressEvent(_devAddress);
    }

    function setFeeAddress(address _feeAddress) public {
        require(msg.sender == feeAddress, "setFeeAddress: FORBIDDEN");
        require(_feeAddress != address(0), "setFeeAddress: ZERO");
        feeAddress = _feeAddress;
        emit setFeeAddressEvent(_feeAddress);
    }

    // Update the merd referral contract address by the owner
    function setMerdReferral(IMerdReferral _merdReferral) public onlyOwner {
        merdReferral = _merdReferral;
        emit setReferralAddressEvent(_merdReferral);
    }

    // Update the burn wallet
    function setBurnWallet(address _burnWallet) public onlyOwner {
        burnAddress = _burnWallet;
    }

    // Update referral commission rate by the owner
    function setReferralCommissionRate(uint16 _referralCommissionRate)
        public
        onlyOwner
    {
        require(
            _referralCommissionRate <= MAXIMUM_REFERRAL_COMMISSION_RATE,
            "setReferralCommissionRate: invalid referral commission rate basis points"
        );
        referralCommissionRate = _referralCommissionRate;
        emit setReferralCommissionRateEvent(_referralCommissionRate);
    }

    // Pay referral commission to the referrer who referred this user.
    function payReferralCommission(address _user, uint256 _pending) internal {
        if (address(merdReferral) != address(0) && referralCommissionRate > 0) {
            address referrer = merdReferral.getReferrer(_user);
            uint256 commissionAmount = _pending.mul(referralCommissionRate).div(
                10000
            );

            if (referrer != address(0) && commissionAmount > 0) {
                safeMerdTransfer(referrer, commissionAmount);
                merdReferral.recordReferralCommission(
                    referrer,
                    commissionAmount
                );
                emit ReferralCommissionPaid(_user, referrer, commissionAmount);
            }
        }
    }

    // Reduce emission rate by 5% every 600 blocks ~ 30 min. This function can be called publicly.
    function updateEmissionRate() public {
        if(merdPerBlock<=0.05 ether){
            return;
        }
        if (block.number > startBlock) {
            uint256 currentIndex = block.number.sub(startBlock).div(
                EMISSION_REDUCTION_PERIOD_BLOCKS
            );
            uint256 newEmissionRate = merdPerBlock;

            if (currentIndex > lastReductionPeriodIndex) {
                for (
                    uint256 index = lastReductionPeriodIndex;
                    index < currentIndex;
                    ++index
                ) {
                    newEmissionRate = newEmissionRate
                        .mul(1e4 - EMISSION_REDUCTION_RATE_PER_PERIOD)
                        .div(1e4);
                }
                if (newEmissionRate < merdPerBlock) {
                    massUpdatePools();
                    lastReductionPeriodIndex = currentIndex;
                    uint256 previousEmissionRate = merdPerBlock;
                    merdPerBlock = newEmissionRate;
                    if(merdPerBlock <= 0.05 ether){
                        merdPerBlock = 0.05 ether;
                    }
                    emit EmissionRateUpdated(
                        msg.sender,
                        previousEmissionRate,
                        newEmissionRate
                    );
                }
            }
        }
    }
}

[{"inputs":[{"internalType":"contract Mermaid","name":"_merd","type":"address"},{"internalType":"contract IMerdReferral","name":"_merdReferral","type":"address"},{"internalType":"uint256","name":"_startBlock","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":false,"internalType":"uint256","name":"previousAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newAmount","type":"uint256"}],"name":"EmissionRateUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"referrer","type":"address"},{"indexed":false,"internalType":"uint256","name":"commissionAmount","type":"uint256"}],"name":"ReferralCommissionPaid","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountLockedUp","type":"uint256"}],"name":"RewardLockedUp","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"indexed":false,"internalType":"contract IBEP20","name":"_lpToken","type":"address"},{"indexed":false,"internalType":"uint16","name":"_withdrawFeeBP","type":"uint16"},{"indexed":false,"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"addEvent","type":"event"},{"anonymous":false,"inputs":[],"name":"massUpdatePoolEvent","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_newDevAddress","type":"address"}],"name":"setDevAddressEvent","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"indexed":false,"internalType":"uint16","name":"_withdrawFeeBP","type":"uint16"},{"indexed":false,"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"setEvent","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_feeAddress","type":"address"}],"name":"setFeeAddressEvent","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"contract IMerdReferral","name":"_newAddress","type":"address"}],"name":"setReferralAddressEvent","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_newRate","type":"uint256"}],"name":"setReferralCommissionRateEvent","type":"event"},{"inputs":[],"name":"EMISSION_REDUCTION_PERIOD_BLOCKS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"EMISSION_REDUCTION_RATE_PER_PERIOD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"INITIAL_EMISSION_RATE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAXIMUM_REFERRAL_COMMISSION_RATE","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IBEP20","name":"_lpToken","type":"address"},{"internalType":"uint16","name":"_withdrawFeeBP","type":"uint16"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"burnAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"address","name":"_referrer","type":"address"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"devAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"feeAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_from","type":"uint256"},{"internalType":"uint256","name":"_to","type":"uint256"}],"name":"getMultiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"lastReductionPeriodIndex","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"merd","outputs":[{"internalType":"contract Mermaid","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"merdPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"merdReferral","outputs":[{"internalType":"contract IMerdReferral","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"pendingMerd","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IBEP20","name":"","type":"address"}],"name":"poolExistence","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IBEP20","name":"lpToken","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardBlock","type":"uint256"},{"internalType":"uint256","name":"accMerdPerShare","type":"uint256"},{"internalType":"uint16","name":"withdrawFeeBP","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"referralCommissionRate","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"uint16","name":"_withdrawFeeBP","type":"uint16"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_burnWallet","type":"address"}],"name":"setBurnWallet","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_devAddress","type":"address"}],"name":"setDevAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_feeAddress","type":"address"}],"name":"setFeeAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IMerdReferral","name":"_merdReferral","type":"address"}],"name":"setMerdReferral","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"_referralCommissionRate","type":"uint16"}],"name":"setReferralCommissionRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"updateEmissionRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"},{"internalType":"uint256","name":"rewardLockedUp","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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