Address io14wdutjy8x5a22w2k3ees4krfdscgnkq8hcy5ay

// File @openzeppelin/contracts/token/ERC20/[email protected]

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}


// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @openzeppelin/contracts/token/ERC20/[email protected]

// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;



/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, _allowances[owner][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = _allowances[owner][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Spend `amount` form the allowance of `owner` toward `spender`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}


// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/utils/[email protected]

// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;


/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}


// File @openzeppelin/contracts/access/[email protected]

// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File @openzeppelin/contracts/utils/math/[email protected]

// OpenZeppelin Contracts (last updated v4.5.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a / b + (a % b == 0 ? 0 : 1);
    }
}


// File @openzeppelin/contracts/security/[email protected]

// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}


// File contracts/Vesting.sol

pragma solidity 0.8.10;






struct CreateVestingInput {
    address user;
    uint128 amount;
}

/**
 * @title Vesting
 * @dev 3 stages: 0 = no rate applies(until cliffEnd), 1 = rateDuringStage1(until stage1End), 2 = rateDuringStage2(until vestingEnd)
 * @dev no user can claim until contract is unlocked
 */
contract Vesting is Ownable, ReentrancyGuard {
    using SafeERC20 for IERC20;

    error VestingIsNotUnlocked();
    error NoZeroAddress(string param);
    error NothingToClaimCurrentlyPleaseTryAgainLater();
    error DepositedAmountIsInsufficientPleaseDepositMore();
    error WrongInputParameters();
    error AlreadyUnlocked();
    error OnlyOneVestingPerAddress();
    error MustNotBeZero(string param);
    error NoActiveVesting();
    error EmptyInputArray();

    struct UserVesting {
        bool init;
        uint256 amount;
        uint256 amountClaimed;
        uint256 lastClaimAt;
    }

    bool public locked = true;
    uint256 public totalAmountAllocated; // Amount owner allocated for users

    uint256 public constant YEAR_IN_SECONDS = 31536000;
    uint256 public constant RATE_CONVERTER = 100;

    IERC20 public immutable vestedToken;
    string public name;
    uint256 public immutable cliffEndAt;
    uint256 public immutable stage1EndAt;
    uint256 public immutable vestingEndAt;
    uint256 public immutable claimableAtStart; // percentage
    uint256 public immutable rateDuringStage1; // annual percentage rate
    uint256 public immutable rateDuringStage2; // annual percentage rate

    mapping(address => UserVesting) public vestings;

    event NewVestingCreated(address indexed user, uint256 amount);

    event NewClaim(address indexed user, uint256 amountClaimed);

    constructor(
        IERC20 _vestedToken,
        string memory _name,
        uint256 _cliffEndAt,
        uint256 _stage1EndAt,
        uint256 _vestingEndAt,
        uint256 _claimableAtStart,
        uint256 _rateDuringStage1,
        uint256 _rateDuringStage2
    ) {
        if (!(_cliffEndAt < _stage1EndAt && _stage1EndAt <= _vestingEndAt)) {
            revert WrongInputParameters();
        }
        uint256 total = _claimableAtStart +
            ((_stage1EndAt - _cliffEndAt) * _rateDuringStage1) /
            YEAR_IN_SECONDS +
            ((_vestingEndAt - _stage1EndAt) * _rateDuringStage2) /
            YEAR_IN_SECONDS;
        if (total != 100) {
            revert WrongInputParameters();
        }

        if (address(_vestedToken) == address(0)) {
            revert NoZeroAddress("_vestedToken");
        }

        name = _name;
        vestedToken = _vestedToken;
        cliffEndAt = _cliffEndAt;
        stage1EndAt = _stage1EndAt;
        vestingEndAt = _vestingEndAt;
        claimableAtStart = _claimableAtStart;
        rateDuringStage1 = _rateDuringStage1;
        rateDuringStage2 = _rateDuringStage2;
    }

    /**
     * @notice allow users to claim their vested tokens
     */
    function unlock() external onlyOwner {
        if (!locked) {
            revert AlreadyUnlocked();
        }

        locked = false;
    }

    /**
     * @notice Move vesting to another address in case user lose access to his original account
     */
    function moveVesting(address from, address to) external onlyOwner {
        UserVesting memory vesting = vestings[from];
        if (vesting.amount - vesting.amountClaimed == 0) {
            revert NoActiveVesting();
        }
        if (vestings[to].init) {
            revert OnlyOneVestingPerAddress();
        }
        if (to == address(0)) {
            revert NoZeroAddress("to");
        }

        vestings[to] = vesting;
        delete vestings[from];
    }

    /**
     * @notice create vesting for user, only one vesting per user address
     * @dev owner needs to first deploy enough tokens to vesting contract address
     */
    function createVestings(CreateVestingInput[] calldata vestingsInput)
        external
        onlyOwner
    {
        if (vestingsInput.length == 0) {
            revert EmptyInputArray();
        }
        uint256 totalDepositedAmount = getDepositedAmount();
        uint256 amountAllocated;

        for (uint64 i = 0; i < vestingsInput.length; i++) {
            amountAllocated += vestingsInput[i].amount;
        }
        // check if depositor have enough credit
        if ((totalDepositedAmount - totalAmountAllocated) < amountAllocated) {
            revert DepositedAmountIsInsufficientPleaseDepositMore();
        }

        for (uint64 i = 0; i < vestingsInput.length; i++) {
            _createVesting(vestingsInput[i]);
        }
    }

    /**
     * @dev can be called any amount of time after vesting contract is unlocked, tokens are vested each block after cliffEnd
     */
    function claim() external nonReentrant {
        if (locked) {
            revert VestingIsNotUnlocked();
        }

        UserVesting storage vesting = vestings[msg.sender];
        if (vesting.amount - vesting.amountClaimed == 0) {
            revert NoActiveVesting();
        }

        uint256 claimableAmount = _claimable(vesting);

        if (claimableAmount == 0) {
            revert NothingToClaimCurrentlyPleaseTryAgainLater();
        }

        vesting.amountClaimed += claimableAmount;
        vesting.lastClaimAt = block.timestamp;

        assert(vesting.amountClaimed <= vesting.amount);

        vestedToken.safeTransfer(msg.sender, claimableAmount);
        emit NewClaim(msg.sender, claimableAmount);
    }

    // return amount user can claim from locked tokens at the moment
    function claimable(address _user) external view returns (uint256 amount) {
        return _claimable(vestings[_user]);
    }

    function getDepositedAmount() public view returns (uint256 amount) {
        return vestedToken.balanceOf(address(this));
    }

    // create a vesting for an user
    function _createVesting(CreateVestingInput memory v) private {
        if (v.user == address(0)) {
            revert NoZeroAddress("user");
        }
        if (v.amount == 0) {
            revert MustNotBeZero("amount");
        }
        if (vestings[v.user].init) {
            revert OnlyOneVestingPerAddress();
        }

        totalAmountAllocated += v.amount;

        vestings[v.user] = UserVesting({
            init: true,
            amount: v.amount,
            amountClaimed: 0,
            lastClaimAt: 0
        });

        emit NewVestingCreated(v.user, v.amount);
    }

    function _claimable(UserVesting memory v)
        private
        view
        returns (uint256 amount)
    {
        uint256 amountLeft = v.amount - v.amountClaimed;
        if (amountLeft == 0) return 0;
        if (block.timestamp >= vestingEndAt) {
            return amountLeft;
        }

        if (v.lastClaimAt == 0) {
            amount += (claimableAtStart * v.amount) / RATE_CONVERTER;
        }

        if (block.timestamp > cliffEndAt) {
            if ((v.lastClaimAt < stage1EndAt)) {
                uint256 start = Math.max(v.lastClaimAt, cliffEndAt);
                uint256 end = Math.min(block.timestamp, stage1EndAt);

                amount +=
                    (rateDuringStage1 * v.amount * (end - start)) /
                    (YEAR_IN_SECONDS * RATE_CONVERTER);
            }

            if ((block.timestamp > stage1EndAt)) {
                uint256 start = Math.max(v.lastClaimAt, stage1EndAt);
                uint256 end = Math.min(block.timestamp, vestingEndAt);

                amount +=
                    (rateDuringStage2 * v.amount * (end - start)) /
                    (YEAR_IN_SECONDS * RATE_CONVERTER);
            }
        }

        amount = Math.min(amount, amountLeft);

        return amount;
    }
}

[{"inputs":[{"internalType":"contract IERC20","name":"_vestedToken","type":"address"},{"internalType":"string","name":"_name","type":"string"},{"internalType":"uint256","name":"_cliffEndAt","type":"uint256"},{"internalType":"uint256","name":"_stage1EndAt","type":"uint256"},{"internalType":"uint256","name":"_vestingEndAt","type":"uint256"},{"internalType":"uint256","name":"_claimableAtStart","type":"uint256"},{"internalType":"uint256","name":"_rateDuringStage1","type":"uint256"},{"internalType":"uint256","name":"_rateDuringStage2","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AlreadyUnlocked","type":"error"},{"inputs":[],"name":"DepositedAmountIsInsufficientPleaseDepositMore","type":"error"},{"inputs":[],"name":"EmptyInputArray","type":"error"},{"inputs":[{"internalType":"string","name":"param","type":"string"}],"name":"MustNotBeZero","type":"error"},{"inputs":[],"name":"NoActiveVesting","type":"error"},{"inputs":[{"internalType":"string","name":"param","type":"string"}],"name":"NoZeroAddress","type":"error"},{"inputs":[],"name":"NothingToClaimCurrentlyPleaseTryAgainLater","type":"error"},{"inputs":[],"name":"OnlyOneVestingPerAddress","type":"error"},{"inputs":[],"name":"VestingIsNotUnlocked","type":"error"},{"inputs":[],"name":"WrongInputParameters","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountClaimed","type":"uint256"}],"name":"NewClaim","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"NewVestingCreated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"RATE_CONVERTER","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"YEAR_IN_SECONDS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_user","type":"address"}],"name":"claimable","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimableAtStart","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"cliffEndAt","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"user","type":"address"},{"internalType":"uint128","name":"amount","type":"uint128"}],"internalType":"struct CreateVestingInput[]","name":"vestingsInput","type":"tuple[]"}],"name":"createVestings","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getDepositedAmount","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"locked","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"moveVesting","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rateDuringStage1","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rateDuringStage2","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"stage1EndAt","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAmountAllocated","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"vestedToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"vestingEndAt","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"vestings","outputs":[{"internalType":"bool","name":"init","type":"bool"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"amountClaimed","type":"uint256"},{"internalType":"uint256","name":"lastClaimAt","type":"uint256"}],"stateMutability":"view","type":"function"}]

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